233 Ergebnisse - Zeige 161 von 180.

Excerpt from Drilling Practice and Jig Design: A Treatise Covering Comprehensively Drilling and Tapping Operations, and the Design of Drill Jigs and Fixtures for Interchangeable ManufactureIn the construction of practically all machinery, a great many holes must be drilled, owing to the extensive use of bolts and studs for holding the various parts together. The drilling ma chines or drill presses, as they are often called, which are used for ...

Excerpt from Elementary AlgebraThe simplest use made of letters to represent numbers is in formulas. A formula may be defined as a mathematical rule expressed by Signs and symbols instead of in actual words. The Object is to make it possible to condense into small space the information that otherwise would be imparted by long and cumbersome rules.The symbols used in formulas, as well as in algebra in general, are mainly the letters in the alph...

Excerpt from Use of Formulas in Mechanics: Applications to Engineering Problems Levers Strength of BeamsThe whole information as to how to determine the indicated horse power of an engine is given in a very small space in the formula, while to write the same in English would require considerable of the space at our disposal.Take the case of an 8 X 10-inch engine running at 100 revolutions per minute under 125 pounds mean effective pressure, he...

Excerpt from Screw Thread CuttingThe lead of a screw thread is the distance the screw will move forward in a nut if turned around one full revolution. It is clear that for a single-threaded screw the pitch and the lead are equal, as the screw would then move forward the distance from one thread to the next if turned around once. In a double-threaded screw, however, the screw will move forward two threads, or twice the pitch, so that in a doubl...

Excerpt from Handbook of Small Tools: Comprising Threading Tools, Taps, Dies, Cutters, Drills, and Reamers, Together With a Complete Treatise on Screw-Thread SystemsThe majority of the tables are original, and have never been published before, except those which have appeared under the author's name in Machinery, in which, in the form Of separate articles, a great deal of the material has already been published. In the preparation Of the mate ...

Excerpt from Shop Arithmetic for the MachinistIn that case the fraction indicates a division. This system will be followed in many of the following formulas, and it should therefore be remembered that the line between the numerator and denominator in a fraction always indicates a division, the numerator to be divided by the denominator.The actual division, however, is not necessarily worked out in every case where division is thus implied. Whe...

Excerpt from Modern Apprenticeships and Shop Training Methods: A Review of the Methods Used in a Number of American Machine-Building Plants in the Training of Apprentices and Machine Operators With a View to Providing for the Future Needs of the Industries for Skilled Mechanics, Foremen, and SuperintendentsFor years American manufacturers have been so 'busy increasing plant facilities, devising more efficient means of production, and designing...

Excerpt from Modern Apprenticeships and Shop Training Methods: A Review of the Methods Used in a Number of American Machine-Building Plants in the Training of Apprentices and Machine Operators With a View to Providing for the Future Needs of the Industries for Skilled Mechanics, Foremen, and SuperintendentsFor years American manufacturers have been so 'busy increasing plant facilities, devising more efficient means of production, and designing...

Excerpt from Shop Mathematics: A Treatise on Applied Mathematics Dealing With Various Machine-Shop and Tool-Room Problems, and Containing Numerous Examples Illustrating Their Solution and the Practical Application of Useful Rules and FormulasMany of the more elementary subjects, such as addition, multiplication, division, etc., have been omitted, as prac tically all skilled men and most apprentices possess this rudi mentary knowledge. But, in ...

Excerpt from Advanced Shop Arithmetic for the MachinistWhen the terms of the fraction are not perfect squares (squares 01 whole numbers), it is preferable to change the common fraction to a decimal fraction, and extract the square root of this.About the PublisherForgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.comThis book is a reproduction of an important historical work. Forgotten Boo...

Excerpt from Screw Thread Tools and GagesIn order to fix definitely the number of threads per inch correspond ing to any given diameter in the U. S. S. System, Mr. William Sellers, its originator, proposed the following approximate formula.About the PublisherForgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.comThis book is a reproduction of an important historical work. Forgotten Books u...

Excerpt from Tables and Formulas for Shop and Drafting-RoomKnowledge of algebra is not necessary for the use of formulas in solving simple problems, all the mathematical knowledge necessary is an understanding of the fundamental rules of arithmetic. The letters in formulas simply stand in place of the figures which are applied for specific cases or problems.About the PublisherForgotten Books publishes hundreds of thousands of rare and classic ...

Excerpt from Iron and Steel: Principles of Manufacture, Structure, Composition and TreatmentThe principles of iron and steel manufacture as outlined in the present chapter were originally given in an article by Mr. George Schuhmann in The Pilot, and republished in the August, 1907, issue of machinery.About the PublisherForgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.comThis book is a r...

Excerpt from Solution of Triangles: A Treatise on the Use of Formulas and the Practical Application of Trigonometry and Logarithms in the Solution of Shop Problems Involving Right-Angled and Oblique-Angled TrianglesIn mathematical and mechanical books and treatises, as well as in articles containing calculations published in the engineering journals, formulas are used to a great extent instead of rules. In these formulas, signs and symbols are...

Excerpt from Solution of Triangles: A Treatise on the Use of Formulas and the Practical Application of Trigonometry and Logarithms in the Solution of Shop Problems Involving Right-Angled and Oblique-Angled TrianglesIn mathematical and mechanical books and treatises, as well as in articles containing calculations published in the engineering journals, formulas are used to a great extent instead of rules. In these formulas, signs and symbols are...

Excerpt from Spiral and Worm Gearing: A Treatise on the Principles, Dimensions, Calculation and Design of Spiral and Worm Gearing, Together With Chapters on the Methods of Cutting the Teeth in These Types of GearsThe manner in which machinery's book, Spur and Bevel Gearing, has been received by the mechanical world has prompted the compilation and publication of a companion book on Spiral and Worm Gearing. This subject has often been presented...

Keine Beschreibung.

Keine Beschreibung.

Keine Beschreibung.

Keine Beschreibung.